generalcanada
Senior Member
wait i thought that loco tender was effectively cancelled? thats been hanging around for almost 2 years
|
|
|
GO Transit Fleet Equipment and other
- Thread starter drum118
- Start date
RU479
Active Member
There is a new one that MX has listed in their 2024 Annual Procurement Plan.
Bojaxs
Active Member
Perhaps a newer version of the MP54AC? Slightly more horsepower? MP55AC?
Part of the contract could also be MP40's being refurbished to MP54's. Locomotive 647 came back into service just recently.
Willybru21
Active Member
Wasn’t that engine out of service for years due to reliability issues? I thought that was the reason why Metrolinx didn’t go forward with converting more engines
Bojaxs
Active Member
Out of service for 18 months. But foamers were reporting it was just recently brought back into service.
Maybe Wabtec figured out a fix for the refurbishment and they're testing it out with locomotive 647.
GOTransitFan206
New Member
5500 HP is too small of an upgrade. It's not worth it when you can spend, (for example) $1000 for a 10,000 HP upgrade,or a $500 upgrade of 100 HP.
Correction: It was actually the stairs in between the TTC Union and GO Bay Concourse, if I remember correctly.
RU479
Active Member
Some interior shots of the refurbished 2114 (a Series II car).
cplchanb
Senior Member
yay! no screens between seats!
Bojaxs
Active Member
It's no surprise why GO is in no rush to obtain EMUs. The amount of value they're getting from their bilevel coaches is incredible. I'm right in assuming this coach was manufactured in 1983? 40 years old, still going strong. How may people has this coach moved over it's life span? Will probably keep going for another 10 years.
Willybru21
Active Member
Hawker Siddeley (the original manufacturer for these cars) originally designed them to be very modular, the Series 1 cars when they were first built had provisions for EMU conversion inside of them, however I assume after multiple rebuilds those provisions no longer exist or would work with modern tech.
GO studied converting the Bi-Levels into EMU’s in a 1980 study and concluded that it would be too complicated and wouldn’t work with a lack of space in the cars for EMU equipment.
Here’s some cool concept art that Hawker Siddeley made for GO, VIA, and just a general design before anyone ordered them:
GO studied converting the Bi-Levels into EMU’s in a 1980 study and concluded that it would be too complicated and wouldn’t work with a lack of space in the cars for EMU equipment.
Here’s some cool concept art that Hawker Siddeley made for GO, VIA, and just a general design before anyone ordered them:
Last edited:
turbanplanner
Senior Member
screens have been out for a while in my experience
Thank you for the photos! I haaaaaate the tiny bathrooms though! Sad they didn't re-do in the new style
cplchanb
Senior Member
im pretty sure they could convert a existing cars to DMU power cars where the lower level is the powerpack section. Im surprised they didnt think of that and are pushing forward with locos. ditto for EMU conversion
RU479
Active Member
Don’t think there’s any room to move the washrooms, the lower level on the older cars don’t have the space for the washrooms that are on the new cars.
Willybru21
Active Member
Yeah the B end door and a entire window needed to be removed on the Series 5b-10 coaches to add a lower level washroom, you can’t add them to older coaches without putting them through a massive retrofit.
Here’s a comparison between the Series 1 and 10 coaches, you can see the door is moved over quite a bit on the Series 10 coach:
Here’s a comparison between the Series 1 and 10 coaches, you can see the door is moved over quite a bit on the Series 10 coach:
turbanplanner
Senior Member
Thanks never considered that, or why some cars end seats have no window!