WalkieScorchie
New Member
Dec. 14 - Peeking through from St. Clair and Yonge
Toronto The One | 308.6m | 85s | Tridel | Foster + Partners
- Thread starter urbandreamer
- Start date
C-mac
Senior Member
jer1961
Active Member
Photos taken today, Friday (Dec. 15). Since my last set of shots last Friday, the north and west Rail Climbing Systems (RCSs) have moved up, with the north RCS up 2 levels to install the skin on the 15th floor, the west to level 14. The east RCS is still at level 16, though it may pause there as the 1st mechanical level is next. A worker I spoke to a while back said there'd be a pause at that level. Meanwhile, at the top, the blue forms have moved up and we are level 48, I think. The blue corner forms have stayed in place since last week, but a lot of progress there as it seems the floor for the base of the next hanging sections are about to be poured. (BloorMan's recent photos have a better view of this.) Indeed, in one photo showing a crew on the west side, we can just make out the floor attachment segment for the hangers for the SW corner in place (also visible in the long shot from the south). Seems the crews are moving quickly now to get those floors done as the next bunch of top attachment points for the hangers are soon to emerge from under the rising super-column forms on top.
Starting with the "time-lapse" photo for the Flickr album I have, followed by views from the south, where we see the skin now mostly installed up to level 14. Shots from the NE, where the light bathed the tower. It's looking pretty spectacular so far, IMHO. Then the west side from in front of Holt Renfrew, as we now see the skin emerge as the west RCS rises. Shots from Cumberland east of Bay, including a tight shot of the corner scaffolds with the floors for the next hanging section ready to be poured, it seems. The final shot, from Bloor at Bedford, shows the corners on the west side with crews at work.
www.flickr.com
For all my posted photos (900+) over the past three years:
www.flickr.com
Starting with the "time-lapse" photo for the Flickr album I have, followed by views from the south, where we see the skin now mostly installed up to level 14. Shots from the NE, where the light bathed the tower. It's looking pretty spectacular so far, IMHO. Then the west side from in front of Holt Renfrew, as we now see the skin emerge as the west RCS rises. Shots from Cumberland east of Bay, including a tight shot of the corner scaffolds with the floors for the next hanging section ready to be poured, it seems. The final shot, from Bloor at Bedford, shows the corners on the west side with crews at work.
The One (1 Bloor West) "time-lapse"
From October, 2020, as above-ground construction started in earnest at The One (1 Bloor W.) in Toronto. More or less a weekly photo usually taken on a Friday, with some gaps during early-on construction hiatuses. The initial photographs are from 2015, during demolition at the site, 2018, during...
www.flickr.com
For all my posted photos (900+) over the past three years:
The One (1 Bloor West) construction
Photos of The One (1 Bloor West) construction progress, including a "before" shot from 2011 and several from 2015 after the demolition of Stollery's. Notable for likely becoming Canada's first supertall building, i.e., over 300 metres (985 feet) tall. (The CN Tower does not fall under the...
www.flickr.com
Last edited:
BloorMan
Active Member
As expected, another floor pour has been completed. I also saw a couple of guys working on the upper crane brace. We might see the crane grow 1 or 2 sections on Saturday. Further, it looks like the sidewalk access along Bloor is usable again and the bike lane has reopened.
jibsta
Active Member
did the sheer walls end the same level the columns reduced in size?
BloorMan
Active Member
I'm sure the columns reduce in size every 10 floors or so. As for the walls, that seemed to disappear right when the receivership was announced back in October.
3Dementia
Senior Member
While 'no walls' certainly explains the pace we've seen... it seems bizarre to me structurally (have zero engineering knowledge though) and the implications for whatever actual unit floor plans end up being planned (or re-designed).
Surely these higher floors won't be carved up into units with just drywall (even with noise baffles).... confused again.
Collingwoodbuildinglover
Active Member
Building may need to have slightly more sway at higher floors for wind load to compensate. This is about the halfway mark that these sure walls disappeared so I think it may help. Just been the destructural portion of those walls was no longer needed
khaldoon
Active Member
While 'no walls' certainly explains the pace we've seen... it seems bizarre to me structurally (have zero engineering knowledge though) and the implications for whatever actual unit floor plans end up being planned (or re-designed).
Surely these higher floors won't be carved up into units with just drywall (even with noise baffles).... confused again.
From the beginning some floors were designed to have fewer or even no lateral walls depending on the distribution of units per floor. Now, which floors have which layout may have changed but it is not something they wouldn’t have accounted for. Here are some of different residential floor layouts:
Konkrete
New Member
The concrete pump is gone??.
jibsta
Active Member
i dont get it, they arbitraily have or don't have them on different floors for same types? maybe it is every 6 floors where the corner hangers start have the walls? the marketing floor plans show the sheer walls even in the large suites on high floors
UpwithOlives
Active Member
Doubt that, it’s in BloorMan’s photos from yesterday…
ushahid
Senior Member
Any konkrete evidence of that?
Benito
Senior Member
jibsta
Active Member
so, so far none of the levels above mech -2 have sheer walls