grammin
Active Member
From the waterfront today
Toronto Pinnacle One Yonge | 345.5m | 105s | Pinnacle | Hariri Pontarini
- Thread starter androiduk
- Start date
Northern Light
Superstar
Just a modest 3-pack from my travels yesterday, Sept 8th, 2023:
yrt+viva=1system
Senior Member
9.10.2023
mburrrrr
Senior Member
Pictures from Aug 31 Sept 5 and Sept 11
Some interesting pictures of the tension bar system
Adding some protective temporary tape to the sheet metal sleeve and bar.
Looks like a pipe wrench on some sort of coupling attaching the two lengths of steel. Who put that basket and washroom in my way? Maybe some better pictures in a few weeks.
The larger diameter sheetmetal sleeves cover the joints. All the sheet metal sleeves will be encased in concrete and not assessable, assuming there are no access panels? I didn’t see any forms for this. I guess the bars can “move/sway” within the sleeve and be pulled “freely” for tensioning. Fascinating…. for geeks.
How many lengths will be joined together? Just one system or multiple? Anyone?
Sept 5 The end of the road for this sign?
Sept 11
The parking lot where phase 3 will be located is getting reworked/cleaned up again.
Some interesting pictures of the tension bar system
Adding some protective temporary tape to the sheet metal sleeve and bar.
Looks like a pipe wrench on some sort of coupling attaching the two lengths of steel. Who put that basket and washroom in my way? Maybe some better pictures in a few weeks.
The larger diameter sheetmetal sleeves cover the joints. All the sheet metal sleeves will be encased in concrete and not assessable, assuming there are no access panels? I didn’t see any forms for this. I guess the bars can “move/sway” within the sleeve and be pulled “freely” for tensioning. Fascinating…. for geeks.
How many lengths will be joined together? Just one system or multiple? Anyone?
Sept 5 The end of the road for this sign?
Sept 11
The parking lot where phase 3 will be located is getting reworked/cleaned up again.
BoomOne
New Member
You can see the details (https://urbantoronto.ca/forum/threa...-hariri-pontarini.17920/page-379#post-1953374) and how they are supposed to work (a few posts down) from @buildtoronto.
wmedia
Senior Member
From the other side, earlier today:
C-mac
Senior Member
SKULL_KRUSHER
New Member
There are tabs that will be used for grouting those ducts after the system is tensioned. You are correct that the post tensioning bars are free to move around inside the ducts....... for now. They need to unbonded to the concrete wall they are within so that they can be tensioned at the end of the wall construction. They probably connect new lengths at every level or so, hence those wider bulges in the ducts at the couplers.
innsertnamehere
Superstar
can someone remind me - has the height increase to 344m been approved here yet? no, right? The city just approved the changes to the south commercial block, right?
Northern Light
Superstar
DavidCapizzano
Senior Member
milkycontent
Active Member
This in an extremely generous rendering of the Yonge St slip lmao. If only!!
Mercenary
Active Member
Whats the hold up? No Shadow issues that I know of and it's at the tip of Yonge Street...so makes an impressive mark having the tallest building of Canada located at the beginning of Yonge Street. Let's make this tall.
A Torontonian Now
Senior Member
September 9:
drum118
Superstar
Aug 19
Just up loaded the last of the photos for the 19th that can be found in a number of locations for the day to my site
Just up loaded the last of the photos for the 19th that can be found in a number of locations for the day to my site