JasonParis
Moderator
CF East Harbour is now VE East Harbour.
CF East Harbour is now VE East Harbour.
CF Seems to be shedding everywhere.CF East Harbour is now VE East Harbour.
Metrolinx is actively planning for it. It just takes time, they need all the stations “future proofed” so they can be converted quickly then need to retrofit all the train cars as well.. it’s not an east transition.I really do wish that GO would move toward level boarding.
Elevators, as in plural? Currently, most transit agencies are retrofitting elevators into existing stations for accessibility. However, they tend to be singular elevator, which means if they are out-of-service for maintenance or vandalism, the station is no longer accessible. Same problem with elevators in high rises.Metrolinx is actively planning for it. It just takes time, they need all the stations “future proofed” so they can be converted quickly then need to retrofit all the train cars as well.. it’s not an east transition.
If you look at all the recent GO stations built in the last few years they are all clearly future proofed for it. Elevators, stairs, etc all drop passengers at the level of the existing accessible platform then passengers have to drop back down a few steps to the main platform. Eventually it’ll be flat for level boarding.
I’m hoping the conversion is included in the ONExpress contract, but I’m not sure on that.
I’m hoping the conversion is included in the ONExpress contract, but I’m not sure on that.
My fear is that it seems that if they do raise the platform they won't raise it to the more common 380mm, 550mm, 760mm, 1100mm, or 1250mm platform heights that would actually allow us to get off the shelf international trains sets, but instead choose some platform height that is in the middle of things. The decision to move away from TTC gauge on new lines was made for the reason of being able to buy "off the shelf" but if the platform height doesn't match that of markets that produce a lot of trains the goal will not be met.I really do wish that GO would move toward level boarding.
My fear is that it seems that if they do raise the platform they won't raise it to the more common 380mm, 550mm, 760mm, 1100mm, or 1250mm platform heights that would actually allow us to get off the shelf international trains sets, but instead choose some platform height that is in the middle of things. The decision to move away from TTC gauge on new lines was made for the reason of being able to buy "off the shelf" but if the platform height doesn't match that of markets that produce a lot of trains the goal will not be met.
Currently GO platforms are built to 127 mm ATR (Above Top of Rail) height and station platform
standards reflect this. Platforms of this height require customers to board/alight a rail vehicle by
climbing two steps. However platform heights for level boarding will be 610 mm ATR (for details
on dimensions for straight and curved platform, refer GO Track Standard (GTS) plan 3004).