TransitBart
Senior Member
So why are these not a part of the trial?
So why are these not a part of the trial?
Here's what's been on the Ministry's books for years:
View attachment 128074
http://www.mto.gov.on.ca/english/handbook/bus/section4-2-7.shtml
Include the green directional arrow sequenced with separate and cyclist lights, and signs aren't necessary, albeit optional. The present ones could stay. Include the Red Light Camera option and cops are minimally needed too. This would actually *pay for itself* (and show a surplus, as it has in many jurisdictions) and be far more effective enforcement.
What's not to like about that besides some posters blocking information that they're oblivious to?
Speaking of blocking information, I clearly explained in this post why the vertical transit bar cannot be used on King Street to represent through movements. Let me know which part you question.
Then explain to me why the City can't modify the restrictions placed on the TTC's operations (not Provincially imposed) instead of the City claiming, as per DSC's posted reply from the City as to the (gist) "necessary legislative changes" to allow newer interpretations or wordings of the Act. (It can be done by Order in Council, effectively, by the Minister).The issue with the current vertical white bar in the HTA is a combination of what's written and the setup that has been used on the existing transit bars in Toronto.
As you (Amnesia June) noted, the HTA definition gives the right of way to transit going left, right and straight. But in certain jurisdictions, a more-restrictive definition has been used by the transit agency itself, to allow more efficient signal operations. In Toronto, the white bar has been given the meaning of left or right only, to allow perpendicular or opposing turns to occur simultaneously. For example, at King & Sumach the transit phase looks like this:
https://www.thestar.com/news/city_h...obe-of-parking-officers-tweets-continues.htmlWeeks later, probe of parking officer’s tweets continues
The police association president says he is no clearer on which tweets got Kyle Ashley in hot water or who complained.
[...]
An online petition to bring him back had 724 signatures Friday, while cyclist Rob McLarty, who often chronicles his commutes with videos posted on Twitter, said motorists seem to be reverting to their old ways. The two other officers dedicated to bike lanes remain on the job, but both have had vacations since Ashley went off work.
“The other day I had 13 people blocking lanes on my two-kilometre ride. When Kyle was around it would never be that bad, most of the time it would be completely clear of lane blockers,” McLarty said.
The HTA definition is that transit has the right of way travelling left, right or straight. Therefore pedestrians cannot cross, and you need completely separate phases for eastbound and westbound streetcars
If we accepted that definition streetcars would need to wait till the end of whatever phase was happening before being allowed to travel through the intersection. And then no one would be able to move while the streetcar goes through. Keep in mind that you can't suddenly end a phase, due to the Flashing Don't Walk, Amber and All-Red required.
And even if there weren't the issue of all the current vertical bars in Toronto, there's the fact that the HTA definition of the vertical bar would massively increase signal delays for all road users, including streetcars.
The HTA definition is that transit has the right of way travelling left, right or straight. Therefore pedestrians cannot cross, and you need completely separate phases for eastbound and westbound streetcars. If we accepted that definition streetcars would need to wait till the end of whatever phase was happening before being allowed to travel through the intersection. And then no one would be able to move while the streetcar goes through. Keep in mind that you can't suddenly end a phase, due to the Flashing Don't Walk, Amber and All-Red required.
I agree that we should introduce separate transit signals to let the vehicle signals to always show red (and sometimes green right turn arrow), so that red light cameras can automatically enforce the through movement prohibition. But given the limitations with the vertical bar signal indication, we should focus on the way of actually doing that, which is to add separate green/yellow/red Transit Signal heads similar to those used on the existing streetcar ROWs.
Then explain to me why the City can't modify the restrictions placed on the TTC's operations (not Provincially imposed) instead of the City claiming, as per DSC's posted reply from the City as to the (gist) "necessary legislative changes" to allow newer interpretations or wordings of the Act. (It can be done by Order in Council, effectively, by the Minister).
The City has the answer, there's no need of "legislative changes" to make this work. Ditto Red Light Camera.
The Waterloo example is indicative of flexibility and accommodation by the Ministry. If your assertion is correct (detailed at the link above) then why wouldn't the City have weighed this option and acted *before the event* rather than after?
I don't see any reason that with turn conditions/restrictions stated, the Ministry's published allowable and published example can't be used.
Excellent reply, as it narrows down the possible reasons the City could have to claim 'delay, obfuscation and bewilderment' at addressing the way the task demands.The Ministry definition can be used, or we can use a slightly restricted version as in Waterloo. But first we need to change all of the existing vertical bars to something else, because those currently mean that transit vehicles can turn left or right but not straight. Changing the definition without changing those existing signals would create dangerous conflicts at many of those intersections, as I showed in the King & Sumach example. It is also not safe to have a different meaning for the vertical bar depending on whether you're on King Street are not. That would be creating a significant risk of dangerous operator error. Especially since there are already vertical transit bars on King Street: King & Sumach (EB and NB) and King & Spadina (NB & SB).[...]
I encourage readers to access that link, and read intently. Even if Reaper and I are arguing what may seem to be minutia, I think an answer is already at hand. It won't be optimal, but it will be workable, and the City can change things for the better when more opportune.Also slightly astray from the Ontario guidelines on traffic signals is the placement of signals at intersections. The LRT signals are duplicated, as required, but one of them is located on the near side. However the HTA requires two sets of every signal on the far side, except pedestrian and bicycle signals. But yet again, the configuration installed here is actually better than the one required by provincial guidelines since it provides some signal spread rather than having two signals right next to each other as you'd find in Toronto.
King & Victoria westbound. Note that the LRT crossing is not included in the signalized pedestrian crossing, similar to how the bike path crossing is not included in the signalized pedestrian crossings on Queens Quay. The difference is that here there is a clear indication to pedestrians that they need to check before crossing to the pedestrian button.
For signalled intersections, it's the HTA, not Bylaw.Instead of trying to get a provincial law changed, why not make bylaws?
I'll dig further on this later when I'm more focused, the HTA is as much about what it doesn't exclude as it is what it includes. And you have mentioned the "flashing white vertical bar" a year or so back in an excellent post in the ION string. By your statement, Houston uses that, and I can't help but wonder how the HTA (and associated Acts) define that.
I think a lot of the devil is in the details of "definitions" in the HTA and other Acts, not easy searches. So far, I can find no requirement for the vertical white bar to be continuous and not use a flashing phase, as per Reaper's Houston example: (gist) "akin to an amber light". (See Reaper's ION link posted above) That would immediately indicate priority over traffic, but not over pedestrian phase signals. It would also allow the TTC to keep the present protocol in place elsewhere, since a flashing vertical white bar phase as well as solid would be unique (at this time) to King Street. Ostensibly, a flashing vertical white bar would indicate priority straight ahead (through) the intersection. In effect, an 'advance white' in phase with pedestrian crossings at the same time in the same direction.
I still don't accept that the TTC can't revise their rulebooks. The City is using that line as an excuse for inaction. The rulebook must change no matter what happens.
Sure as hell the present situation is prone to fail at this rate.
I haven't had the time or necessary focus yet to delve into searching. I tried before on the K/W case, and came up relatively empty on the legal background that facilitates their model. The legislation allows for the "Lieutenant Governor in Council" (basically an Order in Council by the Minister) to tweak clauses and conditions purely by diktat. Whether that was done in the K/W situation is an interesting question. However it was done, the same must be available for Toronto.From what I've seen there, I think you're right and Waterloo is using a creative interpretation of the transit signal (within the legislation) that is less generous than the HTA definition, but they took a different creative interpretation than Toronto. It looks like some of the Waterloo signals will have a St. Clair-type operation where pedestrians and traffic are allowed to move in parallel with LRVs. So their definition must be like a green ball (i.e travel straight with the right of way, and turn left or right without the right of way).
It's synchronous that I was just studying the lights at St Clair and Vaughan, albeit there are separate traffic and transit signal heads. I was watching them closely for about ten cycles, and never once were the (ostensible) white bar lights lit (the ones above the red on the transit heads). In fact, from what I observed, unless there's an externally cued command to light the bar, the transit signals were in lock-step with the traffic ones. I'm just headed there again in a few minutes to see if anything has changed. What struck me at the time earlier was "what a waste"...since what we've been discussing is using the one traffic head to conduct all possible movements through King intersections. That would take a tweak of the present signals, a much cheaper (and ostensibly less confusing) option, especially with a proximity sense for approaching streetcars doing a simple interrupt/suspend of the light cycle.It looks like some of the Waterloo signals will have a St. Clair-type operation where pedestrians and traffic are allowed to move in parallel with LRVs.
I'd been promoting laying what would effectively could be described as 'flagstones' to extend the sidewalk out to streetcars to block not only errant motorists, but also cyclists from flying past open/opening streetcar doors. The layout at present is especially prone to doing that since no control or delineation of bike traffic is happening, a huge mistake as far as I'm concerned. It was pointed out to me a few days back that there's no plan for facilitating that 'platform'.But in addition there could be more passive enforcement (by design). One thing which could help is to block off any areas where cars are able to overtake a streetcar on the right.
It's synchronous that I was just studying the lights at St Clair and Vaughan, albeit there are separate traffic and transit signal heads. I was watching them closely for about ten cycles, and never once were the (ostensible) white bar lights lit (the ones above the red on the transit heads). In fact, from what I observed, unless there's an externally cued command to light the bar, the transit signals were in lock-step with the traffic ones. I'm just headed there again in a few minutes to see if anything has changed. What struck me at the time earlier was "what a waste"...since what we've been discussing is using the one traffic head to conduct all possible movements through King intersections. That would take a tweak of the present signals, a much cheaper (and ostensibly less confusing) option, especially with a proximity sense for approaching streetcars doing a simple interrupt/suspend of the light cycle.
Just posted this as an addendum to prior post, but will post it as a fresh supplement to this post:Like all other vertical bars in Toronto, the St. Clair & Vaughan transit bar is used to let streetcars or buses turn, but not go straight. Namely the westbound 90 Vaughan bus turns right onto Vaughan Rd (but it can also use the right-turn arrow, depending on when it shows up during the cycle), or streetcars going out of service down to Bathurst. The signals do have transit priority, though the priority is not 100% given that the intersection is quite constrained for capacity. I recommend filming the signal and comparing what the green times are in the absence of approaching streetcars vs. when there's a streetcar approaching. I think you'll find it suspiciously common for the signal to change to yellow just after the streetcar goes through.
It would be possible to also add an inserted phase to let streetcars go straight before left turns proceed, but I don't think it would be appropriate here because there are so many phases already and the intersection is constrained for capacity. Such an inserted transit phase would however be a no-brainer at the minor intersections along St. Clair (as well as Spadina and the Queensway).
https://cptdb.ca/topic/30-st-clair-row/?page=7&tab=comments#comment-292500rollsign29
Posted June 10, 2009
63 Ossington said:
Please pardon my ignorance, but what is the NA system and how does it work? Thanks!
The simple answer to it is a series of radio frequencies emitted from a beacon on the underside of a transit vehicle. Buses have them in the front, streetcars in the front and back. For buses, it's predominantly for activating transit priority signals. For streetcars, it's for priority signals, as well as setting switches (the front beacon emits one of two signals, operator-controlled through a dash button) that will set a switch in the desired path (hence the 'NA' signs hung from overhead near switches). The rear beacon on a streetcar "unlocks" the switch per say, so that the following streetcar can set it without running the risk of throwing the switch while the streetcar in front is still on it.
Now, as for the transit signal at Vaughan & St Clair, I was up there today doing some observations. It seems that there are two distinct "priority" phases for westbound transit vehicles.
1. The White Bar (w/ Red Light). Exclusive phase for any transit vehicle heading east or westbound in the ROW. This one seems to be activated by a bus parked right over the loop sensor at the switch heading westbound, as I did not see it go on too often. Streetcars also activate this when they set the switch to divert, for cars heading south on Vaughan.
2. Right-turn Signal (Green Right Arrow w/ Red Light). This one only appears to be activated when there is a large cue of traffic southbound on Vaughan, which triggers the southbound advanced signal, the only time that the right-turn transit arrow comes on. This is only for movements by 90/90A Vaughan buses to get off the ROW. All other westbound movements are held at the red light.
And then of course is the standard green light (w/o a red light). I'm pretty sure the general rule for this one is that straight through and left-hand turns are all permitted, yielding the right-of-way, and that right-turns are not allowed unless controlled by a priority signal. Not 100% sure, but I do know there needs to be some re-education on what a white bar means ... of the 5 or so priority signals I watched, only once did a bus move on it, and it was a 7B Bathurst bus turning west-to-south.