UtakataNoAnnex
Senior Member
/And there it is gif <3
Last edited:
Toronto T3 Bayside | 42m | 10s | Hines | 3XN
- Thread starter taal
- Start date
WeirdFishes
Active Member
This is one of the best office projects going up right now. It's going to be so exciting seeing the timber getting installed.
achender
Active Member
Seems like it goes quick like steel structure once they get started.
Last edited:
daptive
Active Member
Last edited:
achender
Active Member
At work after dark with some double height posts.
Some of the multi ply floor (slab?} from a couple days ago.
Some of the multi ply floor (slab?} from a couple days ago.
FormerTorontonianBackInTO
New Member
Is there always this much concrete in a timber building? I get the elevator shaft but I thought that it would be limited to that
UtakataNoAnnex
Senior Member
For my understanding, timber tends to be a better medium for vibration transfer than concrete which is oft not desirable. So I suspect the concrete may help attempt to dampen/tone that down a bit.
whatever
Senior Member
I'm a little surprised that the glulam isn't sheathed in something? When the AGO went up every single piece of material had a plastic sheath on it to protect the glulam from the elements. Has the technology just changed in the last decade to make the material more weather resistant?
And how are they protecting it during construction? Those columns look like they'd be ruined the first time someone tries leaning material against them. How's the floor going to stand up to scissor lifts and spider cranes driving across them? Or is this wood the structural wood, and finished millwork is to follow?
The only other significant glulam installation I can think of in Toronto is the AGO, so I'm curious how it all works!
And how are they protecting it during construction? Those columns look like they'd be ruined the first time someone tries leaning material against them. How's the floor going to stand up to scissor lifts and spider cranes driving across them? Or is this wood the structural wood, and finished millwork is to follow?
The only other significant glulam installation I can think of in Toronto is the AGO, so I'm curious how it all works!
AlvinofDiaspar
Moderator
It was also used at the Credit Valley Hospital expansion back in the early 2000s - the glulam elements were exposed during construction:
A Tree-Filled Atrium to Inspire Patients
Farrow Partnership Architects created an indoor forest before digital fabrication came of age.
www.architectmagazine.com
There was also 80 Atlantic, the columns/beams seem to be exposed and then covered later on:
80 Atlantic Avenue | 28.04m | 5s | Hullmark | BDP Quadrangle
i don't get it? so far it's all cement that's the elevator shaft..
AoD
ADRM
Senior Member
There's not really a "standard" at this point because the technology/process (CLT/MLT/glulam/similar) is still relatively new, at least in its contemporary application. The version you see the most of in office and resi right now is a concrete core and underground, with predominantly everything else being one of the wood products, but there are some cases where you're seeing it all done in wood, including the core.
This newly opened, 20-storey cultural centre and hotel in Sweden is making the rounds for being among the most advanced and aggressive tall timber project -- it's among the tallest tall timber buildings ever built, and was built by stacking prefabbed timber modules between two CLT cores, all using wood from forests within 50km of the site. Very cool stuff.
UtakataNoAnnex
Senior Member
Well, that was just the coolest thing I've seen all this week. Thanks! /bowsIt was also used at the Credit Valley Hospital expansion back in the early 2000s - the glulam elements were exposed during construction:
A Tree-Filled Atrium to Inspire Patients
Farrow Partnership Architects created an indoor forest before digital fabrication came of age.www.architectmagazine.com
drum118
Superstar
Dec 12
Toron
Active Member
From Tridel live webcam:
Toron
Active Member
That timber looks unique..so much in love
From Tridel live webcam:
From Tridel live webcam:
StealthyArrow
Active Member
I may be incorrect here, but what is that below grade excavation between T3 and Aqualuna? Is that not the affordable housing block? Have not seen much about it so I would be suprised if construction for it has already begun?