MoObserves
Active Member
Cladding seems to be up! Tts just hidden on the inside side of the tower. Spotted it in person yesterday. Here it is in @Red Mars 's photo
The One | 338.3m | 94s | Mizrahi Developments | Foster + Partners
- Thread starter urbandreamer
- Start date
thaivic
Active Member
mburrrrr
Senior Member
I’m sure those coils will be a lot fun replacing. Pretty easy to install now.
thaivic
Active Member
First cladding confirmed!
khaldoon
Active Member
These ones wouldn’t be bad using a mobile crane but think of those that will be installed at higher mechanical sections at heights of 200 or 300 meters!
adHominem
Senior Member
UpwithOlives
Active Member
Somebody needs to get up on that scaffolding and get a better shot...
jer1961
New Member
Here are some shots of the cladding from today.
3Dementia
Senior Member
Smoky goodness .... just needs some champagne 
on the side (same as the mock-up so ... yay).
on the side (same as the mock-up so ... yay).
kotsy
Senior Member
yay!!
I don't know about you guys but I have the urge to celebrate tonight!
I don't know about you guys but I have the urge to celebrate tonight!
UtakataNoAnnex
Senior Member
Well, I'll try not to...but this did get me thinking. That is, while I'm not going to base this on any of the renderings...rather the actuals from this article I deep dived into the UT memory lane to get:..
Exclusive Preview of The One’s Exterior Finishes | UrbanToronto
Mockups of the materials destined for The One from Mizrahi Developments, to be Canada's tallest building at the corner of Bloor and Yonge streets in Downtown Toronto, show off the quality in the design by Foster + Partners and Core Architects.
...so this is how it should come together in the finishings. And that's not what's really going up there now...or at least in appearances. But I say appearances, as I am not sure that's all what's going up there to be said and done - this is not Madison we're dealing with here, or least I hope not. Rather there are what appears to be places to attach vestiges to coincide with least the diagrids from the photos above...as I suspect there will also be with the corners as well. We shall see!
(Don't @ me either, I'm just observing! >.<)
Last edited:
jer1961
New Member
More photos from today. I have an album of some 300 shots of the project, new photos added more or less weekly since October 2020.
www.flickr.com
I'll likely add the latest "time lapse" photo tomorrow.
The One (1 Bloor West) construction
Photos of The One (1 Bloor West) construction progress. Notable for likely being Canada's first supertall building, i.e., over 300 metres (985 feet) tall. (The CN Tower does not fall under the definition of building or skyscraper.) Originally to be 309 metres (1,014 feet) and 85 stories, the...
www.flickr.com
I'll likely add the latest "time lapse" photo tomorrow.
heatscore
Active Member
Yep, that corrugated cladding above the glass wasn't included in the mockup, but it's all over the rendering (between most of the floors). Heres hoping it turns out like the examples in your link!Well, I'll try not to...but this did get me thinking. That is, while I'm not going to base this on any of the renderings...rather the actuals from this article I deep dived into the UT memory lane to get:..
Exclusive Preview of The One’s Exterior Finishes | UrbanToronto
Mockups of the materials destined for The One from Mizrahi Developments, to be Canada's tallest building at the corner of Bloor and Yonge streets in Downtown Toronto, show off the quality in the design by Foster + Partners and Core Architects.urbantoronto.ca
...so this is how it should come together in the finishings. And that's not what's really going up there now...or at least in appearances. But I say appearances, as I am not sure that's all what's going up there to be said and done - this is not Madison we're dealing with here, or least I hope not. Rather there are what appears to be places to attach vestiges to coincide with least the diagrids from the photos above...as I suspect there will also be with the corners as well. We shall see!
(Don't @ me either, I'm just observing! >.<)
Heller94
New Member
I mys
I myself had a glass to celebrate
I myself had a glass to celebrate
daptive
Active Member
Well, I'll try not to...but this did get me thinking. That is, while I'm not going to base this on any of the renderings...rather the actuals from this article I deep dived into the UT memory lane to get:..
Exclusive Preview of The One’s Exterior Finishes | UrbanToronto
Mockups of the materials destined for The One from Mizrahi Developments, to be Canada's tallest building at the corner of Bloor and Yonge streets in Downtown Toronto, show off the quality in the design by Foster + Partners and Core Architects.
...so this is how it should come together in the finishings. And that's not what's really going up there now...or at least in appearances. But I say appearances, as I am not sure that's all what's going up there to be said and done - this is not Madison we're dealing with here, or least I hope not. Rather there are what appears to be places to attach vestiges to coincide with least the diagrids from the photos above...as I suspect there will also be with the corners as well. We shall see!
(Don't @ me either, I'm just observing! >.<)
I think there’s a chance what we’re seeing is exactly what was previewed. In the second photo the upper part of the glass is inset deeper, I imagine the metal cladding goes overtop that. The section of the glass that covers the diagonal beam also looks unfinished on the outside, and I imagine cladding will also overlay that.