Toronto Curio Condos on the Queensway | 37m | 10s | Marlin Spring | Graziani + Corazza

AlbertC

Superstar
Member Bio
Joined
Apr 24, 2007
Messages
23,253
Reaction score
63,924
Location
Davenport

Marlin Spring are planning a new development for this property along the Queensway @ Taymall Ave which used to be a PartSource store. It's around 3 blocks west of Royal York.

Their development portfolio indicates 146 Condominium Units and GFA 187,000 Sq.Ft.


1574799876578.png
 
Let me guess, Marlin Spring and G+C yet again? It's probably time to move on with this, we know it's most likely going to be uninspiring trash.

The last thing I want is for The Queensway is for it to turn into Marlin Spring's landfill to dump their garbage developments on.
 
801 THE QUEENSWAY
Ward 03 - Etob. York District



11 storey mixed-use building consisting of 1185 square metres of commercial use at grade and 206 residential units.

Proposed Use ---​
# of Storeys 11​
# of Units ---​
Type​
Number​
Date Submitted​
Status​
Applications:
Rezoning​
19 260968 WET 03 OZ​
Dec 13, 2019​
Under Review​
 
G+C:

Screen Shot 2019-12-20 at 3.02.25 PM.png


 
Glad they joined the overwhelming majority of UT. For the most part, no one is ever enthusiastic about Marlin Spring, let alone when they combine with that joke of "architecture" firm known as G+C.
 
Glad they joined the overwhelming majority of UT. For the most part, no one is ever enthusiastic about Marlin Spring, let alone when they combine with that joke of "architecture" firm known as G+C.
Unfortunately their enthusiasm must be based on planning merit not on architectural merit.

Opposition will come from the grounds of density and massing, not of design.
 
Unfortunately their enthusiasm must be based on planning merit not on architectural merit.

Opposition will come from the grounds of density and massing, not of design.
Just another layer to the unfortunate state of Toronto planning.
 
Just another layer to the unfortunate state of Toronto planning.
The biggest challenge for the site is not density as they have not applied for anything over what's currently allowed to 3x. The issue is the 3 bed, minimum 1000 sqft requirements, it's handcuffing a lot of developers. Why would someone buy a 3 bed condo at over 1.2 mill when the housing in the area is not much more?
 

Back
Top