M II A II R II K
Senior Member
Transportation costs too much
November 22, 2011
By David Levinson
Read More: http://blog.lib.umn.edu/levin031/transportationist/2011/11/transportation-costs-too-much.html
When I was growing up (in suburban Maryland), there was an ad on local TV from Crown Books. Founder Robert Haft asserted "books cost too much", which led him to create Crown Books, and helped put independent booksellers out of business decades before Amazon became villain #1 among the literati. Yet unlike independent booksellers, we weep not for the independent contractors and businesses that charge so much for transportation infrastructure, equipment, and operations.
• Signalized intersections (~$175K),
• Buses (~$400K),
• Roundabouts (~$300K),
• Loop detectors (~$5K) (ed. installed),
• Diamond interchanges (~$9M),
• Bridges to nowhere Houlton, Wisconsin (~$668M),
• Light rail lines (~$1.4B),
• High-speed rail lines (~$100B), etc.
Just some of the all quite pricey elements of transportation in early 21st century America. It sure seems like we should be able to build this cheaper. Think about it, $175K for 12 lightbulbs on a timer. What's going wrong?
1. Standards have risen. Our obsession with safety, features, environmental protection, and quality drive up the cost. Engineering design is often 20% of project costs. If only we would tolerate a few more deaths, a bus without AC, pollution, and frequent breakdowns, our initial costs would be lower. But when do reasonable investments become gold plating? Does the firetruck really need to do a 360 degree turn on the cul-de-sac, or can it back out?
2. Principal-agent problem. Public works agencies are spending Other People's Money, and so are less motivated to get value for dollar than an individual consumer on their own. This principal-agent problem prevails in lots of organizations, but especially so in public works where the bias is not to have a failure. There was an old saying in business, no one ever got fired for buying IBM. The same holds in public works, where rocking the boat with new or innovative technologies is not sufficiently rewarded.
3. Thin markets. There is no Amazon.com or eBay for public works. I cannot go on Amazon and buy a transit bus or an interchange. The internet has not driven down prices in this field the way it has in so many others. As a result a few vendors can collude or orchestrate higher prices than would be faced in a more competitive market.
4. There are in-sufficient economies of scale. When everything is bespoke, there is no opportunity for standardization and economies of scale. While many rail against cookie-cutter design, it is only with cookie-cutters that we get lots of cookies.
5. Projects are scoped wrong. We have investments that don't match actual demands. And this is not just for megaprojects. We have big buses serving few passengers. We have overgrown highways. We have a fear of building too small and having congestion or crowding so we build too big.
6. Benefits are concentrated, costs are diffuse. As a result, the known beneficiaries lobby hard for projects, but not just to build it, but to build it in a way that is expensive. Costs are diffuse, it is seldom worth the taxpayer's time to oppose a project just because of its costs, which are spread among millions of other taxpayers.
7. Decision-makers are remote. Remote actors cannot have precise information about local conditions, and in the absence of a free market in transportation (there is generally one buyer, who is generally a government agency), prices are not clear. As a result these remote actors misallocate because they are misinformed. This notion derives from the Economic calculation problem and Hayek's Fatal Conceit.
8. No one actually does B/C analysis. A recent headline in the San Jose Mercury News says:
.....
November 22, 2011
By David Levinson
Read More: http://blog.lib.umn.edu/levin031/transportationist/2011/11/transportation-costs-too-much.html
When I was growing up (in suburban Maryland), there was an ad on local TV from Crown Books. Founder Robert Haft asserted "books cost too much", which led him to create Crown Books, and helped put independent booksellers out of business decades before Amazon became villain #1 among the literati. Yet unlike independent booksellers, we weep not for the independent contractors and businesses that charge so much for transportation infrastructure, equipment, and operations.
• Signalized intersections (~$175K),
• Buses (~$400K),
• Roundabouts (~$300K),
• Loop detectors (~$5K) (ed. installed),
• Diamond interchanges (~$9M),
• Bridges to nowhere Houlton, Wisconsin (~$668M),
• Light rail lines (~$1.4B),
• High-speed rail lines (~$100B), etc.
Just some of the all quite pricey elements of transportation in early 21st century America. It sure seems like we should be able to build this cheaper. Think about it, $175K for 12 lightbulbs on a timer. What's going wrong?
1. Standards have risen. Our obsession with safety, features, environmental protection, and quality drive up the cost. Engineering design is often 20% of project costs. If only we would tolerate a few more deaths, a bus without AC, pollution, and frequent breakdowns, our initial costs would be lower. But when do reasonable investments become gold plating? Does the firetruck really need to do a 360 degree turn on the cul-de-sac, or can it back out?
2. Principal-agent problem. Public works agencies are spending Other People's Money, and so are less motivated to get value for dollar than an individual consumer on their own. This principal-agent problem prevails in lots of organizations, but especially so in public works where the bias is not to have a failure. There was an old saying in business, no one ever got fired for buying IBM. The same holds in public works, where rocking the boat with new or innovative technologies is not sufficiently rewarded.
3. Thin markets. There is no Amazon.com or eBay for public works. I cannot go on Amazon and buy a transit bus or an interchange. The internet has not driven down prices in this field the way it has in so many others. As a result a few vendors can collude or orchestrate higher prices than would be faced in a more competitive market.
4. There are in-sufficient economies of scale. When everything is bespoke, there is no opportunity for standardization and economies of scale. While many rail against cookie-cutter design, it is only with cookie-cutters that we get lots of cookies.
5. Projects are scoped wrong. We have investments that don't match actual demands. And this is not just for megaprojects. We have big buses serving few passengers. We have overgrown highways. We have a fear of building too small and having congestion or crowding so we build too big.
6. Benefits are concentrated, costs are diffuse. As a result, the known beneficiaries lobby hard for projects, but not just to build it, but to build it in a way that is expensive. Costs are diffuse, it is seldom worth the taxpayer's time to oppose a project just because of its costs, which are spread among millions of other taxpayers.
7. Decision-makers are remote. Remote actors cannot have precise information about local conditions, and in the absence of a free market in transportation (there is generally one buyer, who is generally a government agency), prices are not clear. As a result these remote actors misallocate because they are misinformed. This notion derives from the Economic calculation problem and Hayek's Fatal Conceit.
8. No one actually does B/C analysis. A recent headline in the San Jose Mercury News says:
.....